| Part No: |
10007 |
| Manufacturer: |
VIAIR Corp |
Complete 100% Constant Duty Onboard Air System.
By ordering a single part number, you can take all of the guess-work out of getting all of the parts you'll need to install one of the most sophisticated, all-inclusive onboard air systems available today. The Constant Duty Onboard Air System comes complete with a long-running 450C, 100% Duty Cycle compressor at its heart that will fill the supplied 2.5 gallon tank from 110-150 PSI in approximately one minute. Unlike our other systems, the Constant Duty Onboard Air System can operate for longer periods of time without needing to rest. Included is everything you'll need to add a reliable air source to your vehicle as well as inflate tires with the included clip-on air chuck.
(For vehicles with up to 37-inch tires)
VIAIR Onboard Air System Includes:
- (1) 2.5 Gallon Viair Air Tank
- (1) 450C model Viair Air Compressor
- (1) 35ft. Coil Hose
- (1) 1/4 inch Quick Connect Stud (F)
- (1) 1/4 inch NPT Quick Connect Coupler (F)
- (1) Dash Panel Gauge with ON/OFF Switch
- (1) Pressure Switch with Relay (110 PSI on, 150 PSI off)
- (1) Reducer (1/8 inch NPT F to 1/4 inch NPT M)
- (1) 1/4 inch NPT 175 PSI Safety Valve
- (1) 1/4 inch Drain Cock
- (3) 1/4 inch NPT Compression Fittings
- (1) 4-inch Strip of Continuous Grommet Material
- (1) 20ft. 12 Gauge Wire with Inline Fuse Holder
450C Tire Inflation Rates
This kit will air a 35 x 12.5 tire:
0 To 30 PSI 6 Min. 55 Sec.
15 to 30 PSI 3 Min. 30 Sec.
This all-inclusive kit includes everything you need to install an on board kit.
|
